Stego 01190.0-00 : ET 011 Electronic Thermostat, SPDT, 0-60 C, 24 VDC 16A Heating or Cooling

Product Description

16 Amp DC switching capacity
Low hysteresis
Wide adjustment range
DIN rail mountable

The ET 011 is an electronic thermostat for regulating high performance DC 24V equipment. Heating or cooling equipment, as well as signal devices, can be switched via the SPDT (change-over) contact.
A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical thermostats.

Note: For use with convection heaters only.

Switch temperature difference	approx. 5.4°F ± 1.8°F tolerance (3K ± 1K)
Sensor element	PTC
Contact type	SPDT / change-over contact
Service life	> 100 000 cycles
Max. switching capacity	16A @ 28Vdc
Max. inrush current	16A Vdc
Connection	5-pole terminal, clamping torque 0.5Nm max.: solid wire 14 awg (2.5mm²), stranded wire (w/wire end ferrule) 16 awg (1.5mm²)
Housing	plastic according to UL94 V-0, light grey
Mounting	molded plastic clip for 35mm DIN rail, EN 60715
Mounting position	vertical
Operating/Storage temperature	+14 to +140°F (-10 to +60°C) / -49 to +176°F (-45 to +80°C)
Mounting position	vertical
Operating/Storage temperature	+32 to +140°F (0 to +60°C) / -49 to +176°F (-45 to +80°C)
Operating/Storage humidity	max. 95% RH (non-condensing)
Dimensions	2.6x2.0x1.8" (67 x 50 x 46mm)
Weight	approx. 2.8 oz (80g)
Protection type Weight	IP20