Stego 01131.0-00 : ETR 011 DIN Rail Enclosure Electronic Thermostat SPDT, LED Scale -20 to 60C, 230V/8A, 24Vdc/4A, Operating/Storage -40 to 185F, IP20, 35mm DIN Rail

Product Description

Optical function display (LED)
Low hysteresis
Wide adjustment range
DIN rail mountable

The ETR 011 is an electronic thermostat used for controlling heating or cooling equipment, filter fans, or signal devices. The thermostat senses the surrounding air temperature and can switch both resistive and inductive loads via the SPDT (change-over) contact. The integrated LED is lit when the connected device is in operation. A relatively small hysteresis sets the ETR 011 Thermostat apart from less accurate mechanical thermostats.

Switching difference	7°F (4°K) ±1.8°F (1°K) tolerance at 68°F (20°C)
Sensor element	NTC
Reaction time	approx. 5 seconds
Contact type	SPDT / change-over contact (relay)
Service life	> 50,000 cycles
Max. switching capacity (relay output)	240VAC, 8A resistive / 1.6A inductive
	120VAC, 8A resistive / 1.6A inductive
	24VDC, 100W
Max. Inrush Current	VAC 16A for 10 seconds
Connection	5-pole terminal, clamping torque 0.5Nm max.: solid wire 14 awg (2.5mm²) stranded wire (w/wire end ferrule) 14 awg (2.5mm²)
Mounting	molded plastic clip for 35mm DIN rail, EN 60715
Mounting position	vertical
Housing	plastic according to UL94 V-0, light grey
Dimensions	2.5x1.6x1.5" (64.5 x 42 x 38mm)
Weight	approx. 2 oz (60g)
Operating / Storage temperature	-40 to +185°F (-40 to +85°C) / -49 to +185°F (-45 to +85°C)
Operating / Storage humidity	max. 95 % RH (non-condensing)
Protection type	IP20
Approvals	cUL File# E164102 - VDE