Vortec 7570 : Hazardous Duty Class I Div. 2 Low Noise Vortex AC 5000 Btu 70 SCFM Complete Kit

Vortec 7570 : Hazardous Duty Class I Div. 2 Groups A, B, C and D Low Noise (62dba) 2-Stage Vortex A/C, 5000 Btu, 70 SCFM, with mechanical thermostat and 5-micron Auto-Drain Filter & (2)Ducting Kits

Keep purged panels cool, clean, and protected with the new Hazardous Location Duty Vortex A/C! 

Total cooling protection for Purged Enclosures 

Avoid downtime with the most affordable, reliable and easiest to install enclosure protection product available in the market!

• Must be used in conjunction with a customer supplied purge/pressurization system
• Lowest cost compared to explosion proof air conditioners
• Very easy and quick top or side mount installation, no wiring, no electricity
• No maintenance required
• Extremely reliable
• Very quiet, 62 dBA operation
• Integral mechanical thermostat maintains 80° to 90° F temperatures
• 10 year warranty
• Operates in environments up to 175° F (80°C)
• Model 7570 is a two-stage cooler. To conserve energy, during peroids of low heat load only one stage is activated via mechanical thermostat.

Specifications

Pressure 100 psig 6.9 bar Cooling Capacity 5000 Btu/hr 1465 W Air Consumption 70 SCFM 1981 SLPM Inlet 3/8 NPT Average Installation Time 15 min Maximum Ambient Temperature 175 ºF 80 ºC Operating Noise Level 62 to 64 dBA Warranty 10 year

Additional Information

When the going gets Tough… The Hazardous Location Duty Vortex A/C ensures reliable operation in these environments: Hazardous locations Dust and dirt Highly humid or wet locations High heat Airborne mists and oils Sanitizing procedures (food & bev.) The only protection for enclosures with reliable cooling operation in harsh environments up to 175° F (80 °C) All Hazardous Location Duty Vortex A/C models come as a complete system, and include a check valve assembly, cold air ducting kit, cold end muffler, and 5-micron Auto-Drain compressed air filter. Recommended operating pressure for all Hazardous Location Duty Vortex A/C models is 90 to 100 psig (6.2 to 6.9 bar), for correct operation of the mechanical thermostat.