Loading... Please wait...
- Home
- Enclosure Filter Fans
- 11821.0-00 Outdoor Enclosure Exhaust Filter
Product Description
- Quick and easy filter change
- Lockable outer door
- Impact resistant
- Weather and UV resistant
This filter fan can be used in outdoor enclosures where warm air has to be dissipated. To clean and exchange the filter mat, it is only necessary to open the lockable door of the outdoor hood eliminating the need to allow interior access to the enclosure. A protection type of IP55 is achieved due to the special design of the hood and the use of fine filter mats. The plastic used
for the hood of this filter fan is highly weather and UV light resistant.
Technical Data
| Axial fan, ball bearing | service life min. 50,000h at 77°F (25°C) and 65% RH aluminum fan body, plastic rotor |
| Connection | 2 wires w/ cage clamps, AWG 14 (2.5mm²), length 4” (100mm) |
| Filter fan and exhaust filter housing | high impact ASA plastic, light grey burning behavior according to UL 94H-B; high resistance to weather and UV light |
| Mounting frame | with double-sided industrial adhesive for mounting to the outside of enclosure; certain operating circumstances may make the additional use of screws necessary; cut-out template included |
| Filter media rating | F5 acc. to DIN EN 779, filtering degree 98% |
| Filter material | synthetic fiber with progressive construction, temperature resistant to 212°F, self-extinguishing class F1; moisture resistant to 100% RH |
| Operating / Storage temperature | -4 to +158°F (-20 to +70°C) |
| Protection class | I (grounded) |
| Protection type | IP55 |
Note: EMC version and other voltages are available upon request
The hood is attached permanently to the enclosure from the inside using provided screws. Filter mats can be easily changed from outside the enclosure through the lockable door in the hood.
| Part No. | Operating voltage | Air volume, free blowing | Power consumption | Average noise level (DIN EN ISO 4871) | Mounting depth | Enclosure cut-out | Weight (approx.) | Approvals |
| 01821.0-00 | 230VAC, 50Hz¹ | 12 cfm (20m³/h) | 15W | 40dB (A) | 2.4” (62mm) | 4.9 x 4.9” | 2.6 lbs. (1.20kg) | UL File No. E234324 |
| 01821.0-02 | 120VAC, 60Hz | 14 cfm (23m³/h) | 15W | 40dB (A) | 2.4” (62mm) | 4.9 x 4.9” | 2.6 lbs. (1.20kg) | UL File No. E234324 |
¹) air volume increases by 15% when operating 230VAC filter fans at 60Hz
EF 11821 Exhaust Filter
| Part No. | Mounting depth | Enclosure cut-out | Weight (approx.) | Filter mat | Protection type |
| 11821.0-00 | 0.6” (16mm) | 4.9 x 4.9” | 1.6 lbs. (0.60kg) | F5 acc. to DIN EN 779, filtering degree 98% |
IP55 |
FFM 086 Replacement Filters (Mats)
| Filter mat | 4.6 x 4.6” (118 x 118mm) |
| F5 (1 packing unit = 3 pcs.) | Part No. 08604.0-00 |
