Site Information

CONNECT WITH US

 Loading... Please wait...
  • DZ210 Monitor for Direction of Rotation & Standstill
  • DZ210 Dimensional Drawing

Motrona DZ210 Industrial Monitor Incremental Encoder Direction of Rotation & Standstill

$360.00
SKU:
DZ210
Weight:
0.60 LBS
Availability:
In Stock
Current Stock:
Out of stock - Call for availability 740.917.5783
Out of Stock

Product Description

The DZ210 Monitors Direction of Rotation (Forward & Reverse) & Standstill of Incremental Encoders & Sensors (HTL, RS422 or TTL).  There are two output relays 30Vdc/2A (dry change-over contacts) where relay 1 is always used to indicate the direction of rotation (A/B) and relay 2 can indicate either direction of rotation or standstill.  Also, there are two fast responding (200µsec) power transistor outputs (7-30Vdc/max 350mA). There is an auxiliary 5Vdc supply for encoders & sensors.  For the 17-30Vdc power supply use the GDA18-24A 24Vdc/750mA.

 

Model Numbers

 

DZ 210  Simple Monitor for Standstill and Direction of Rotation

 

Link to Detailed PDF Manual

http://www.genesisautomationonline.com/site/pdf/products/GAO/Motrona/_GenesisMotronaConrtolProducts_Dz210_e.pdf

Features

 

  • Simple industrial monitor and controller for control of clockwise or counter-clockwise rotation and standstill
  • Versatile impulse inputs for operation with all common incremental encoders and sensors
  • High maximum input frequency (500 kHz) and very fast response time (<1 msec. with f > 1 kHz)
  • Two output relays (dry change-over) and two fast-responding transistor outputs

 

Other

 

Power Supply  17 - 30 VDC
Current consumption  ca. 30 mA 
 Auxiliary output 5.4 V, max. 200 mA 
 Maximum input frequency

500 kHz (RS422 and TTL-differential)

350 kHz (HTL and TTL single-ended) 

 Impulse inputs

RS422: voltage difference >= 1V

HTL: Low < 4V, High > 9V

TTL: Low < 0,5 V, High > 2,5

 Relays

Dry change-over, switching delay approx. 5msec.

Switching capability: 30 VDC/2 A or 125 VAC/0,6 A or 230 VAC/0,3 

 Transistor Outputs

High-side Driver, Switching delay 200 µsec.

Switching Voltage: 7-30 VDC

Switching Current: max. 350 mA

100% short circuit proof

(not both outputs at a time for a long period) 

 Ambient Temperature

Operation: 0° - 45°C (32° - 113°F)

Storage: -25° - +70°C ( -13° - 158°F) 

 Weight approx. 100g 
 Conformity and Standards EMC89/336/EEC: EN61000-6-2, EN61000-6-3 

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Warranty Information

1 Year

Find Similar Products by Category