Compact convection heater of temperature class T3 (200 °C max.), T4 (275 °F / 135 °C max.), and T5 (212 °F / 100 °C max.) for the prevention of formation of condensation, temperature fluctuations, and for protection against frost within control and switch cabinets, as well as measuring equipment located in areas with explosion hazard, underground mines or mines susceptible to firedamp.
> For areas with explosion and firedamp hazard
> Large Convection Surface
> Clip and Screw Flange Fixing
> Ready-to-use with Strain Relief
> Maintenance Free
> Temperature Class T3, T4, & T5
| Temperature class |
T3 |
T4 |
T5 |
Ex Protection type Ex II 2 GD
Gases
Dusts |
Ex db IIC T3 Gb
Ex tb IIIC T200 °C Db IP66 |
Ex db IIC T4 Gb
Ex tb IIIC T135 °C Db IP66 |
Ex db IIC T5 Gb
Ex tb IIIC T100 °C Db IP66 |
| Ambient temperature |
-76 to +185 °F (-60 to +85 °C) |
-76 to +122 °F (-60 to +50 °C) |
-76 to +122 °F (-60 to +50 °C) |
| Surface temperature |
max. +392 °F (+200 °C) |
max. +275 °F (+135 °C) |
max. +212 °F (+100 °C) |
| Heating element |
high performance cartridge |
high performance cartridge |
high performance cartridge |
| Heater body |
aluminum profile, silver anodized |
aluminum profile, silver anodized |
aluminum profile, silver anodized |
| Connection |
silicone cable (halogen-free) 3 x AWG 18 (0.75 mm²),
length 3 ft (1 m) |
silicone cable (halogen-free) 3 x AWG 18 (0.75 mm²),
length 3 ft (1 m) |
silicone cable (halogen-free) 3 x AWG 18 (0.75 mm²),
length 3 ft (1 m) |
| Connection PE |
AWG 18 to 14 (0.75 to 2.5 mm²) |
AWG 18 to 14 (0.75 to 2.5 mm²) |
AWG 18 to 14 (0.75 to 2.5 mm²) |
| Mounting |
clip for 35 mm DIN rail, EN 60715 for heating body sizes
3.2 x 1.9" and 4.7 x 2.4"; screw mounting with 2 mounting
brackets for all heating body sizes, optional sideways mounting |
clip for 35 mm DIN rail, EN 60715 for heating body sizes
3.2 x 1.9" and 4.7 x 2.4"; screw mounting with 2 mounting
brackets for all heating body sizes, optional sideways mounting |
clip for 35 mm DIN rail, EN 60715 for heating body size
4.7 x 2.4"; screw mounting with 2 mounting brackets for all
heating body sizes, optional sideways mounting |
| Mounting position |
vertical airflow (connection at bottom) |
vertical airflow (connection at bottom) |
vertical airflow (connection at bottom) |
| Storage temperature |
-76 to +185 °F (-60 to +85 °C) |
-76 to +185 °F (-60 to +85 °C) |
-76 to +185 °F (-60 to +85 °C) |
| Operating / Storage humidity |
max. 90 % RH (non-condensing) |
max. 90 % RH (non-condensing) |
max. 90 % RH (non-condensing) |
| Protection type / Protection class |
IP66 / I (grounded) |
IP66 / I (grounded) |
IP66 / I (grounded) |
| Approvals |
EPS 16 ATEX 1 109 X
IECEx EPS 16.0048X
EAC |
EPS 16 ATEX 1 109 X
IECEx EPS 16.0048X
EAC |
EPS 16 ATEX 1 109 X
IECEx EPS 16.0048X
EAC |
| Class |
Part No.
DIN clip mount |
Part No.
Screw mounting Hole spacing
brackets X |
Operating
voltage |
Heating
capacity |
Rec. pre-fuse
T (time-delay) |
Dimensions
(D x W x H) |
Weight
(approx.) |
| T3 |
02032.0-00 |
02032.0-10 |
8.9" (225 mm) |
AC 230 V |
100 W |
1.0 A |
3.2 x 1.9 x 7.1"
(80 x 48 x 180 mm) |
2.2 lbs (1.0 kg) |
| T4 |
02041.9-00 |
02041.9-10 |
5.9" (150 mm) |
AC 120 V |
50 W |
1.0 A |
3.2 x 1.9 x 4.3"
(80 x 48 x 110 mm) |
1.5 lbs (0.7 kg) |
| T4 |
02042.0-00 |
02042.0-10 |
8.9" (225 mm) |
AC 230 V |
100 W |
1.0 A |
4.7 x 2.4 x 7.1"
(120 x 60 x 180 mm) |
3.1 lbs (1.4 kg) |
| T4 |
02042.9-00 |
02042.9-10 |
8.9" (225 mm) |
AC 120 V |
100 W |
2.0 A |
4.7 x 2.4 x 7.1"
(120 x 60 x 180 mm) |
3.1 lbs (1.4 kg) |
| T5 |
02051.0-00 |
02051.0-10 |
8.9" (225 mm) |
AC 230 V |
50 W |
0.5 A |
4.7 x 2.4 x 7.1"
(120 x 60 x 180 mm) |
3.1 lbs
(1.4 kg) |
| T5 |
02051.9-00 |
02051.9-10 |
8.9" (225 mm) |
AC 120 V |
50 W |
1.0 A |
4.7 x 2.4 x 7.1"
(120 x 60 x 180 mm) |
3.1 lbs
(1.4 kg) |
Loading... Please wait...
