Site Information

CONNECT WITH US

 Loading... Please wait...
  • 01170.0-01 High Accuracy EnclosureThermostat SPDT 40 to 140F 230V
  • 01170.0-01 High Accuracy EnclosureThermostat SPDT 40 to 140F 230V

01170.0-01 FZK011 High Sensing Accuracy EnclosureThermostat SPDT 40 to 140°F 230V

$41.80
SKU:
01170.0-01
Weight:
1.00 LBS
Availability:
5-7 weeks
Quantity:

Product Description

  • Wide adjustment range
  • High switching capacity
  • SPDT / change-over contact
  • Very Low hysteresis
  • DIN rail mountable

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans, or signal devices where a high degree of sensing accuracy is required.  An integrated resistor (RF) can be connected to improve the switch temperature difference (see Option note).  The thermostat senses the surrounding air temperature and can switch both resistive and inductive loads via the SPDT (change-over) contact. 

Switch temperature difference approx. 9°F (5K), tolerance -5.4/+3.6°F (-3/+2K)*
Sensor element thermostatic bimetal
Contact type SPDT / change-over contact
Service life > 100 000 cycles
Min. switching current 10 mA
Max. switching capacity, NC 250VAC, 10A resistive / 4A inductive
  120VAC, 10A resistive / 4A inductive
  DC 30W
Max. switching capacity, NO 250VAC, 5A resistive / 2A inductive
  120VAC, 5A resistive / 2A inductive
  DC 30W
Connection 4-pole terminal, clamping torque 0.5Nm max.: solid wire & stranded wire (w/wire end ferrule) 14 awg max. (2.5mm²)
Housing plastic according to UL94 V-0, light grey
Mounting molded plastic clip for 35mm DIN rail, EN60715
Mounting position vertical
Operating/Storage temperature -49 to +149°F (-45 to +65°C)
Operating / Storage humidity max. 90 % RH (non-condensing)
Dimensions 2.6x1.9x1.5" (67x50x38mm)
Weight approx. 2 oz (60g)
Protection type IP20
Approvals cUL (UL File No. E164102)

 

 

*If the Normally Closed (NC) contact is used, the switch temperature difference could be reduced by connecting terminal "N" (RF heating resistor). 

It causes the thermal feedback which is subject to surrounding conditions and thus has to be determined for each individual application.  

 

Part No. voltage Setting range
01170.0-00 230VAC +5 to +60°C
01170.0-01 230VAC +40 to 140°F
01170.9-00 120VAC +40 to 140°F
01170.9-01 120VAC +5 to +60°C

 



Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Warranty Information

1 Year

Find Similar Products by Category