Stego 01163.0-02 : FTD 011 Tamperproof Dual DIN Rail Enclosure Thermostat, preset point, NC 59°°F open/ 41°°F close, NO 95°°F close/ 77°°��

Product Description

NC / NO or NO / NO in one unit
Fixed set points
Color coded modules
DIN rail mountable

Two thermostats in one housing: Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual SPDT/change-over contact.
Tamperproof (Pre-set) Thermostat - NC Opens on temperature rise (red module housing) - for regulating heaters or for switching signal devices when temperature has fallen below the minimum value.
Tamperproof (Pre-set) Thermostat - NO Closes on temperature rise (blue module housing) - for regulating filter fans, heat exchangers, cooling devices or for switching signal devices when temperature limit has been exceeded.

Sensor element	thermostatic bimetal
Contact type	snap-action contact
Service life	> 100,000 cycles
Max. switching capacity	240V AC, 5A resistive / 1.6A inductive
	120V AC, 10A resistive / 2A inductive
	DC 30W
Max. inrush current	AC 16A for 10 seconds
Connection	4-pole terminal, clamping torque 0.8Nm max. solid wire 14 awg max. (2.5mm²) / stranded wire (w/wire end ferrule) 16 awg max. (1.5mm²)
Housing	plastic according to UL94 V-0, light grey
Mounting	molded plastic clip for 35mm DIN rail, EN 60715
Mounting position	vertical
Operating/Storage temperature	-40 to +176°F (-40 to + 80°C) / -49 to +176°F (-45 to + 80°C)
Operating / Storage humidity	max. 90 % RH (non-condensing)
Dimensions	1.8x2.5x1.3" (47 x 63 x 33mm)
Weight	approx. 14.1 oz (40g)
Protection type	IP20
Approvals	cUL (UL File No. E164102), VDE, EAC

Part No.	Switch-off temperature (NC) Contact	Switch-on temperature (NC) Contact	Switch-on temperature (NO) Contact	Switch-off temperature (NO) Contact
01163.0-00	+59°F / +15°C (± 9°F / 5K tolerance)	+41°F / +5°C (± 9°F / 5K tolerance)	+122°F / +50°C (± 11°F / 6K tolerance)	+104°F / +40°C (± 12.6°F / 7K tolerance)
01163.0-01	+77°F / +25°C (± 9°F / 5K tolerance)	+59°F / +15°C (± 9°F / 5K tolerance)	+140°F / +60°C (± 11°F / 6K tolerance)	+122°F / +50°C (± 12.6°F / 7K tolerance)
01163.0-02	+59°F / +15°C (± 9°F / 5K tolerance)	+41°F / +5°C (± 9°F / 5K tolerance)	+95°F / +35°C (± 11°F / 6K tolerance)	+77°F / +25°C (± 12.6°F / 7K tolerance)
01163.0-03	+77°F / +25°C (± 9°F / 5K tolerance)	+59°F / +15°C (± 9°F / 5K tolerance)	+122°F / +50°C (± 11°F / 6K tolerance)	+104°F / +40°C (± 12.6°F / 7K tolerance)

Part No.	Switch-on temperature (NO) Contact	Switch-off temperature (NO) Contact	Switch-on temperature (NO) Contact	Switch-off temperature (NO) Contact
01164.0-00	+122°F / +50°C (± 11°F / 6K tolerance)	+104°F / +40°C (± 12.6°F / 7K tolerance)	+140°F / +60°C (±11°F / 6K tolerance)	+122°F / +50°C (± 12.6°F / 7K tolerance)